Quintessentialz Chain Guide Mountain Bike Tensioner Custom Design…
Model 1: Comes with the 1 upper piece and 2 lower attachments
Model 2: Designed as 1 piece simpler design for install
Model 3: Designed to have adjustable height to adjust chain tension. Comes with 2 wheels.
- New Improved Model - Allows you to Install Chain Guide without Removing Chain, Can be installed on any chain with or without Quick Chain Link
- ⦁Silent, Smooth Operation, Easy Install, Get Rid of Chain Slap - Fits Most Bikes Normal and Fat Bikes
- ⦁Robust Design, Fits over Gear Cable, 2 Lower Attachments, Opens up So you Don't have to Remove Chain
- ⦁Remember to Remove the Red Backing of the Tape to help prevent the Chain Guide from moving1 Year Warranty, Manufactured by 3D Printer, Made in the U.S.A.
- ⦁What you get: 1 Chain Guide with 2 lower attachments, 2 Zipties ⦁Weight: 1.2 oz with zipties - Dimensions: 2.3 inches wide x 2 inches height, 1.2 inches thick.
How to Install Make sure the flat side faces to the front of the bike. Pictured
Peel off the tapes Red backing to help prevent the Chain Guide from moving, Slip the Upper Housing under the break cable so its against the frame and the cable is inside the housing like in the pictures.
Ziptie to the frame, Put lower chain guide around Chain and Screw on
Use with chains that have a Quick Release Chain Link
Introducing Quintessentialz Mountain Bike Chain Guide.
This Chain Guide works silently, so no more chain noise while your peddling.
It'll be nice a quite on your ride, so you can enjoy sounds of nature and the shredding of dirt, while keeping that chain on its chainring where it belongs.
Easily installed with the 2 included zipties. The zinc screw makes sure you don't have worry about rust and pre-installed loctite makes sure the bolt doesn't come off.
We made this a 2 part design, making switching the Lower Chain Guide attachment easy to switch out to a new one in under a minute with a screw driver, while keeping the main housing attached to the frame.
Quintessentialz Bike Chain Guide comes with 2 lower chain guide attachments to make sure you have a spare when you need one.
Each lower chain guide should last you hundreds of miles of use.
The Guide is manufactured by 3D printers, visible layer lines will be seen in the exterior of the product. Though made by 3D printer the chain guide is very strong and durable and all tests have been done with 3D printed models
This chain guide is a custom design by Quintessentialz(TM) and all copy rights apply.Designed and Made in the U.S.A.
We designed it to perform better than the competition and making sure it is over built to withstand the rigors of mountain biking.
Fits mostnormal and fat bikes